 |
 |
 |
|
Capture and transfer up to 3000 gallons of water per hour in one step with the compact RPV vacuum system. Features a powerful, industrial 2-stage vacuum motor. A heavy duty, internal pump transfers wastewater up to 100’ away while vacuuming continues…no need to stop and dump the collection tank. It is ideal for interior and exterior facilities maintenance contractors who need to collect wash water or for restoration contractors who need to pick up large volumes of water after a re or ood. Increase your eciency with optional vacuum tools or even a Vacuum Twister (For use with cold water or hot water up to 200°F) The Hydro Vaccum® control panel has separate, lighted control switches for vacuum and pump out functions giving you the option to run them independently or together. A basket strainer collects large debris, such as leaves or trash, and quickly lifts out for dumping. There is a drain plug at the bottom of the tank to dump any residual sediment that may have settled to the bottom. (For use with cold water or hot water up to 200°F)
*Specs calculated using 25' of 2" Vacuum Hose (DHV25) and 50' of 2" Vacuum hose (DHV50). Consistent air introduction at the pickup is needed to prevent hydraulicing.
NOTE: As long as the water being used is not over 200 degrees, RPV30E1 can be used for carpet cleaning.
Wheel/Cart options: Caster wheel kit (AHS07), Dolly style wheel kit (AHS06),
Accessories: 50’ Vacuum hose (DHV50) x 2 each required, Dry operation filter, 3pack (VFBB3), vacuum scupper (ATP75), Vacuum accessory bundle (ASF10), Twister Vac surface cleaner/vacuum attachment (ANTV5).
Features:
- All industrial duty components
- 2 stage industrial vacuum motor for pick up
- Steel transfer pump for pump out
- 26 gallon collection tank
- High water vacuum shutoff protection
- Easy to clean basket strainer protects the pump
- 2" ports for quick pick up and discharge
Advantages: - Picks up water and pumps it out simultaneously
- Small footprint makes it easy to store or take to a jobsite
- 2 wheel kit options to fit your needs
- Transfers water up to 100' away from the unit
- Can also be used as a high powered shop vac for dry work
Benefits: - Saves time not having to empty the holding tank like a shop vac
- Save money by being able to use one tool for multiple applications
- Use to pickup and transfer water after floods or fires or use to pick up wash water to keep from going down the storm drain
Manual
Wiring Diagram
Click here for the Spec Sheet for RPV30E1 or Brochure
**NOTE: Hoses sold separately: 2 each DHV50 are required, 1 for intake and 1 for outtake
*NOTE: Cannot Ship To Texas
15-20d
|
|
|
|
|
|
Requires: 115v / 15 amp
or 3500w generator
|
Requires: 115v / 20 amp
or 5000w generator
|
|
|
35 GFCI power cord included
|
|
|
Polyethylene, Hexagonal tank, 26 gallon capacity
|
|
|
Optional caster wheel kit or dolly style wheel kit available for increased mobility
|
|
|
Easy to clean strainer basket for pump protection
|
|
|
|
|
|
|
High water level vacuum tank protection � 1� sludge/solids drain
|
|
|
Heavy duty transfer pump with panel mounted on/off switch
|
|
|
2 stage, 100 cfm, 91� sealed lift vacuum
|
2 stage, 106 cfm, 106� sealed lift vacuum
|
|
|
Easy to use, lighted on/off switches
|
|
|
Requires 2� diameter vacuum hose
|
|
|
2� diameter discharge hose recommended
|
|
|
One Year Accessory Warranty
|
|
|
38� tall x 17� wide, 56 pounds
|
|
|
|
 |
|
 |
| Other People Purchased |
|
Hydro-Tek Gray Non Marking Hose 3/8" X 100 Ft 6,000 psi, DH098
|
|
Hot2Go Vacuum Hose 2" x 50' with cuffs #DHV50, 1 Each
|
|
Hydro-Tek Hot-2-Go 2" TO 1 ½" TUBE COUPLER, #VWV61 Need for Wand w/Carpet Nozzle, #VWV56
|
|
Hydro-Tek Larger Nozzle 03 X 15 X 1/8 MEG, NM302
|
|
|
|
|
|
|
|
|
|
|
|
|
Hydro-Tek Hot-2-Go Dry operation filter, 3pack #VFBB3 for RPV30E1 & RPV50E1
|
|
Hydro-Tek Hot-2-Go Hydrotek Vacuum Scupper Head 12" Wide Stainless Steel 2" Connection Hot2Go ATP75
|
|
Hydro-Tek Vacuum Motor, 2 Stage High Performance 120 volts, MEV15 Motor is for RPV301E
|
|
Hydro-Tek Hot-2-Go Aluminum Wand w/Carpet Nozzle Attachment, #VWV56
|
|
|
|
|
|
|
|
|
|
|
|
|
Hydro-Tek Hot-2-Go Caster Style Wheel Kit For RPV30E1 and RPV50E1 High Volume Water Recovery Vacuum System Hot2Go AHS07
|
|
Hydro-Tek Hot-2-Go Hydro Vacuum Accessory Pack ASF10
|
|
Hydro-Tek Twister Vac Water Recovery Surface Cleaner -24.5in., 4000 PSI, 6.0 GPM, #ANTV5
|
|
Hydro-Tek Hot-2-Go Dolly Style Wheel Kit Only For Hydro-Tek Hot-2-Go High-Volume Water Transfer System Model RPV30E1 & Model RPV50E1
|
|
|
|
|
|
|
|
|
|
|
|
|
Excellent equipment 
