Home > Cleaning Products > Chemicals > Commercial Chemicals > Restoration >

Fiberlock, Antimicrobial, Shockwave Cleaner & Disinfectant, Case of 4- 1 Gallon Bottles, A27495
Fiberlock, Antimicrobial, Shockwave Cleaner & Disinfectant, Case of 4- 1 Gallon Bottles, A27495
 
Sale Price: $146.50
Estimated Shipping Cost: $25


Product Code: A27495
Quantity:

Description
 
Fiberlock, Antimicrobial, Shockwave Cleaner & Disinfectant, Case of 4- 1 Gallon Bottles, A27495

ShockWave is an EPA-registered, quaternary ammonium chloride cleaner, disinfectant and sanitizer designed for use on various surfaces subject to microbial contamination. ShockWave is a concentrated formula that will disinfect hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces. ShockWave is especially useful as an all-in-one product for treating wood structural members, carpets, and other porous and nonporous surfaces as part of a complete mold remediation project. ShockWave is registered to kill over 120 organisms including Norwalk Virus, and is approved for the H5N1 avian flu. Shockwave RTU is a convenient ready-to-use formulation. *For most applications- see data sheet for additional information.
Features
Product Data Sheet

How to Use

ShockWave is designed to be diluted two ounces per gallon of water, yielding 64 gallons of usable product per gallon of concentrate, making it an economical solution for your cleaning, disinfecting, and sanitizing needs. ShockWave is available in 1-gallon containers and in convenient 10-ounce bottles that make five gallons of usable product.

ShockWave concentrate is designed to be economical and efficient. ShockWave concentrate should be diluted with water before use. Do not use full strength. ShockWave is also available in ready-to-use.

  1. Add 2-4 ounces of ShockWave per gallon of water.*
  2. Each gallon will cover approximately 1000 square feet of surface.
  3. To disinfect or sanitize, first clean the surfaces of all contamination including mold, mildew and dirt using ShockWave.
  4. Apply a second application of ShockWave to the cleaned surface. Use enough ShockWave so that the surface will remain wet for at least 10 minutes.
  5. For detailed instructions see bottle label or visit www.fiberlock.com/mold/8310.html
  6. Your local disaster relief agencies can advise you on proper Personal Protective Equipment for flood and mold cleanup.

*ALWAYS READ AND FOLLOW THE LABEL INSTRUCTIONS ON THE PRODUCT BEFORE USE.

Share your knowledge of this product with other customers... Be the first to write a review or ask a question